Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco IME issue

 

Hi,

I want to know about the issues which can leads to dis-connectivity between a IPS and IME.
As we are having two IPS modules with a version of 7.1(8)E4 and IME with a version of 7.2.7

Both the IPS are added into this Manager (IME) but the problem we are facing is that after 1 hour a IPS module goes into not-connected state and Sensor health goes critical. This situation is only for a single IPS.

After that if we double-click on that IPS a edit menu opens and didn't change anything into that menu we just click on OK then our dis-connected 
module again connects with IME and lasts till 1 hour.
This same process we have to do continuously after every 1 hour.

our NTP is also working fine and our certificate expiration is till 2015.

PFA screenshot on this link:

https://supportforums.cisco.com/sites/default/files/attachments/discussion/capture_50.jpg

 

Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services

57
Views
0
Helpful
0
Replies
CreatePlease login to create content