Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Cisco IPS 4260 - Monitoring

hi!

we have installed two cisco ips 4260 in our test environment and want now to monitor the inspection load, which is from my point of view much more important than the cpu load, with the open source network tool cacti. I want to send alerts when a specific threshold has exceeded.

I already monitor the cpu load, the interfaces with snmp. Do you know if it is possible to get the value of the inspection load of the ips by snmp?

Which others parameters of the ips sensors are important to monitor?


Thanks!!!

2 REPLIES
Cisco Employee

Re: Cisco IPS 4260 - Monitoring

At this time the sensor's inspection load is not exposed via a SNMP OID.  There is an enhancement request to add SNMP monitoring of various sensor health metrics in a future release.

Thanks,

Scott

New Member

is the enhancement request

is the enhancement request solved? what is the bug reference?

 

regards,

sushil

1223
Views
0
Helpful
2
Replies
CreatePlease to create content