Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not responding

Hi Team,

I am getting the below error while accessing IDM. I rebooted the device, after some times i get the same type of messages..

error connecting to sensor + failed to load sensor. errsystemerror-ct-sensorapp.333 not responding. please check system processes- the connect to the specified lo::clientpipe failed.

Will be appreciated for the quick reply on priority...

regards

Rajesh

14 REPLIES
Gold

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

When the error message tells you to check the system processes, you should check them:

ssh to your sensor and login.

run a "sh ver"

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

Hi,

Pls find the below show version..

Looks like all the processes are running..

Application Partition:

Cisco Intrusion Prevention System, Version 5.1(5)E1

Host:

Realm Keys key1.0

Signature Definition:

Signature Update S323.0 2008-03-24

Virus Update V1.2 2005-11-24

OS Version: 2.4.26-IDS-smp-bigphys

Platform: IPS-4240-K9

Serial Number: xxxxxxxxxxxx

Licensed, expires: 01-Dec-2009 UTC

Sensor up-time is 14:55.

Using 512040960 out of 1454153728 bytes of available memory (35% usage)

system is using 17.4M out of 29.0M bytes of available disk space (60% usage)

application-data is using 44.1M out of 166.8M bytes of available disk space (28%

usage)

boot is using 35.3M out of 68.6M bytes of available disk space (54% usage)

MainApp 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600 Runn

ing

AnalysisEngine 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600 Runn

ing

CLI 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600

Upgrade History:

* IPS-K9-sp-5.1-5-E1 10:28:00 UTC Fri Feb 02 2007

IPS-sig-S323-req-E1.pkg 07:26:42 UTC Tue Mar 25 2008

Recovery Partition Version 1.1 - 5.1(5)E1

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

Hi,

Pls find the logs and let me know what could be the problem...

------------------------------------------------------------------------------------------

ending a TLS warning alert close_notify, the following error occurred: socket error [3,32]05Nov2008 20:05:53.338 106.380 mainApp[272] Cid/E errSystemError AppManager::ApplicationEntry::updateProcessStatus - Application "AnalysisEngine "terminated prematurely05Nov2008 20:06:14.689 21.351 cidwebserver[320] IoPipe/E errSystemError connect timed out [ClientPipe::connect]05Nov2008 20:06:14.711 0.000 cidwebserver[320] Syslog/F ct-sensorApp.333 not responding, please check system processes - The connect to the specified Io::ClientPipe failed.05Nov2008 20:16:32.787 618.098 cidwebserver[325] tls/W errTransport while sending a TLS warning alert close_notify, the following error occurred: socket error [3,32]05Nov2008 20:17:04.090 31.303 cidwebserver[2853] IoPipe/E errSystemError connect timed out [ClientPipe::connect]05Nov2008 20:17:04.090 0.000 cidwebserver[2853] Syslog/F ct-sensorApp.333 not responding, please check system processes - The connect to the specified Io::ClientPipe failed.--------------- .logApp begin Wed 05-Nov-2008 20:18:37 GMT+05:30

------------------------------------------------------------------------------------------

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

Hi Rajesh,

What version of the sensor are you using, if you are using the latest 6.1.1E3, try downgrading and see if that helps by using the 'downgrade' command. If you have been running this version for a while, what's changed in your environment? Open the CLI to the sensor, run the command "show events" and try another connection to the sensor via IDM, place the output here.

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

Hi Adiwakar,

The version is 5.1-5-E1.

I am planning to upgrade the sensor to 6.x version inorder to fix this problem, because I do not find anything related to this issue.

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

Hi,

My upgrade to 6.0 and 6.1 was not successfull and had to reimage to 5.1.6. The device was rebooting frequently inspite of the fact that this has 1GB RAM.

Can anyone give me a solution on this...

-RP

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

You can try re-installing the license. A corrupt license file can cause what you are describing.

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

I am getting the following error:

errSystemError-ct-sensorApp.633 not responding, please check system processes - The connect to the specified Io::ClientPipe failed.

The device is a IDSM-2 running 6.1.(1)E3. Is this a E3 issue only? I rebooted the sensor and it is functioning normally again. We had this happen to an inline sensor and it caused all kinds of problems.

Thx,

Dave

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

I think reset of IPS will resolve this issues..

you need to fine tune the signatures as well..

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

Is there a particular reason why you say I need to fine tune signatures? TAC said to disable 2 sigs and lower the frequency of the auto-update feature. I disabled the sigs as well as the auto-update, rebooted and now it is fine. They said a software fix will be available in a week or so. I'll let you know how it goes.

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

What are the sig ids disabled ?

Were you getting alerts in EV/IME before ??

Im not getting alerts in ime.

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

The problem is resolved after upgrading the signatures.

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

hello sir,

Can you tell me which signatures are tuned to resolve this problem ?

New Member

Re: Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not respo

Actually I have upgraded the signature to the latest version.

Secondly, I monitored the outputs of the below command and disabled few of the signatures which are firing a lot of signatures...

command is --- show statistics virtual-sensor

regards

Rajesh P

1777
Views
5
Helpful
14
Replies
CreatePlease to create content