Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

CSA Upgrade from 4.0.3.736 to 5.0.0.225

Anyone know if there is a way to update directly from CSA 4.0.3.736 to 5.0.0.225? I prefer doing this with the CSAMC by scheduling a software update. I have another CSAMC currently running 5.0.0.225. However, CSAMC 4.0 lists 5.0.0.216 as the highest software update available.

Any suggestions?

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: CSA Upgrade from 4.0.3.736 to 5.0.0.225

Did you run the 5.0.0.225 prepare_40_migration.exe tool on the old MC from a command prompt?

There were a couple of bugs that required this method to work properly.

If you started a previous migration or ran the 216 version of the tool, that would also explain it.

Tom

1 REPLY
Blue

Re: CSA Upgrade from 4.0.3.736 to 5.0.0.225

Did you run the 5.0.0.225 prepare_40_migration.exe tool on the old MC from a command prompt?

There were a couple of bugs that required this method to work properly.

If you started a previous migration or ran the 216 version of the tool, that would also explain it.

Tom

140
Views
0
Helpful
1
Replies
CreatePlease to create content