Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Display the power supply status in the IPS 4270

How to display the status of the power supply on the IPS 4270

since the IPS has two power supplies and one has failed, so i want to check what is causing this failure (i am looking for a message from the CLI describing that the IPS power were failed).

4 REPLIES
Cisco Employee

Re: Display the power supply status in the IPS 4270

At this time, there is no method to display the status of the power supply from the CLI or IDM GUI of the IPS-4270.  There is an open enhancement request to have this capability added in a future release of the IPS software.

Scott

New Member

Re: Display the power supply status in the IPS 4270

Thank you,

do you know how to get this informations on the ASA; since i have a power failure on the ASA also.

Cisco Employee

Re: Display the power supply status in the IPS 4270

Depending on the platform/software version, you may be able to find the details in the output of "show environment".

Scott

New Member

Re: Display the power supply status in the IPS 4270

Thank u a lot

338
Views
0
Helpful
4
Replies