Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

enable pathping across appliance

I am trying to do a Pathping across my network from inside to an external address.

I am foxed as to what I can do - it is the ASA that is blocking it.

Ping and Tracert does not work either

1 REPLY
Bronze

Re: enable pathping across appliance

Internet Control Message Protocol (ICMP) pings and traceroute on the PIX Firewall are handled differently based on the version of PIX and ASA code.Inbound ICMP through the PIX/ASA is denied by default. Outbound ICMP is permitted, but the incoming reply is denied by default.ASA/PIX does not support ICMP redirects, because it does not support asymmetric routing.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094e8a.shtml#topic2

201
Views
0
Helpful
1
Replies
CreatePlease to create content