08-15-2013 10:21 AM - edited 03-10-2019 06:02 AM
Hi, are you able to see the contents of the disk on an ASA-SSM-10 module? Like the show disk0: command on my 5510? I know it has an internal flash disk..Is that where the image and configuration files and software are located? Can one see these files and copy them to TFTP server?
Cheers
Phil
Solved! Go to Solution.
09-19-2013 03:43 PM
Hi Philip,
You can view this content through the service account of IPS. The downside will be that you can only access it with the supervision of TAC. If you want to see the configuration you can do a show config; if you want to see what version are you running you can do it through the show version command.
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"
http://www.cisco.com/web/partners/tools/pdihd.html
09-19-2013 03:43 PM
Hi Philip,
You can view this content through the service account of IPS. The downside will be that you can only access it with the supervision of TAC. If you want to see the configuration you can do a show config; if you want to see what version are you running you can do it through the show version command.
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"
http://www.cisco.com/web/partners/tools/pdihd.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: