I have a client which we connect to through the FWSM, this client now needs to send us some multicast traffic. We currently use multicast traffic heavily inside our network just not through the FWSM....how would I enable our servers to receive multicast traffic from this client through FWSM? It would only be one group (at least for now)...22.214.171.124 for example.
Our 6500 is running nativs IOS and the FWSM is in routed mode.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...