Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM shun

Hi All

We have problems with the FWSM shun sent by IPS that sometimes they seem to stick in there forever and don't automatically clear. Alot of them are recurring and are positive shuns, but there are a few that shouldn't be shunned and they don't clear!

Which would be best way to send an automatic clear shun to the FWSM!

Regards MJ

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: FWSM shun

The shun command lets you block connections from an attacking host. Packets matching the values in the command are dropped and logged until the blocking function is removed manually or by the Cisco IPS sensor.

So you would either have to do it manually or with a script, or the IPS should clear out the shun using the event that triggered it.

I hope it helps.

PK

1 REPLY
Cisco Employee

Re: FWSM shun

The shun command lets you block connections from an attacking host. Packets matching the values in the command are dropped and logged until the blocking function is removed manually or by the Cisco IPS sensor.

So you would either have to do it manually or with a script, or the IPS should clear out the shun using the event that triggered it.

I hope it helps.

PK

730
Views
0
Helpful
1
Replies