Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

How to determine if a SSC-5 IPS is overloaded?

    I've read several posts on that I should be looking at the SSC-5's "Processing Load Percentage" instead of the CPU load to determine the health of the module. But at what processing load percent indicates an overloading of the IPS? Should I be looking at this percentage and some other variables like dropped packets?

1 REPLY
Cisco Employee

How to determine if a SSC-5 IPS is overloaded?

Hi,

The inspection load will tell you if it is overload. Another indication is that you will see overruns on the interfaces.

HTH

Luis Silva

"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"

http://www.cisco.com/web/partners/tools/pdihd.html

Luis Silva "If you need PDI (Planning, Design, Implement) assistance feel free to reach us" http://www.cisco.com/web/partners/tools/pdihd.html
589
Views
0
Helpful
1
Replies
CreatePlease to create content