Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to enable IDS and IPS in CSICO ASA firewall 5520

Can you please help us how can we configure the IDS/IPS in cisco asa firewall

1 REPLY
VIP Purple

Re: How to enable IDS and IPS in CSICO ASA firewall 5520

There are two IDS/IPS solutions for the ASA:

1) A build-in system with very limited functionality:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/protect_tools.html#wp1056358

The security-benefit of this system is quite small and is only counting minimally to your baseline-security. Don't expect to catch any real-world attack on your systems with that.

2) The ASA-IPS module. If you have this module here is the starting-point:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/modules_ips.html
http://www.cisco.com/en/US/docs/security/ips/7.1/configuration/guide/ime/imeguide71.html

If you have never worked with the Cisco-IPS before, then plan a couple of days to get famliliar with that software as it is quite complex to setup and maintain.


Sent from Cisco Technical Support iPad App


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
1317
Views
5
Helpful
1
Replies