Re: How to Troubleshoot the High CPU Utilization in Cisco IPS 42
We have a 4260 going high CPU and causing up 2 seconds of delay. We also are unable to find cause and have to go into bypass mode. We see this when transfer traffic is exceeding about 50Mbit/sec through the link. So far a terrible process getting Cico to help find what causing the high CPU. Any help in determining if a signature of getting abused or some other cause would really help us.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...