Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

how to upgrade IPS 5.1(6)E1 to 6.0(1)-E1.

Hi ,

Iam facing problem in configuring IPS SSM in ASA 5520

1)Its not taking the ip on virtual sensing interface.

2)iam not able to ping the management ip address although the gateway is pingable.

this is the show config of SSM Module.

! ------------------------------

Do i need to upgrade it to 6.0(1)-E1

! Version 5.1(6)

! Current configuration last modified Tue May 2

! ------------------------------

service interface

physical-interfaces GigabitEthernet0/1

description "SSM Interface"

exit

exit

! ------------------------------

service analysis-engine

virtual-sensor vs0

physical-interface GigabitEthernet0/1

exit

exit

! ------------------------------

service authentication

exit

! ------------------------------

service event-action-rules rules0

exit

! ------------------------------

service host

network-settings

host-ip 192.168.1.1/24,192.168.1.2

host-name iyogi_SSM

telnet-option disabled

exit

time-zone-settings

offset 0

standard-time-zone-name UTC

exit

summertime-option disabled

exit

! ------------------------------

service logger

exit

! ------------------------------

service network-access

exit

! ------------------------------

service notification

exit

! ------------------------------

service signature-definition sig0

exit

! ------------------------------

service ssh-known-hosts

exit

! ------------------------------

service trusted-certificates

exit

! ------------------------------

service web-server

port 443

exit

Regards,

1 REPLY
Silver

Re: how to upgrade IPS 5.1(6)E1 to 6.0(1)-E1.

1) IP address cannot be assigned on sensing interfaces.

2) When you say gateway(192.168.1.2) is pingable, do you mean its pingable from the module?

If so, are you able to ping management IP(192.168.1.1) from the gateway and 192.168.1.0/24 network?

Regards,

Vibhor.

Where are you trying to ping management ip from? What is the source IP address?

143
Views
0
Helpful
1
Replies
CreatePlease to create content