Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IDS-4215 Upgrade

Hello - I sucessfully used the IDM to upgrade the IDS 4215 using IPS-K9-r-1.1-a-6-0-5-E3.pkg. But now how do I force the IDS to use the new code? It show in the 'recovery Partition' .. tnks

MainApp 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600 Running

AnalysisEngine 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600 Running

CLI 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600

Upgrade History:

* IPS-K9-sp-5.1-5-E1 20:58:00 UTC Fri Feb 02 2007

IPS-sig-S296-req-E1.pkg 16:15:16 UTC Fri Aug 10 2007

Recovery Partition Version 1.1 - 6.0(5)E3

Cisco Employee

Re: IDS-4215 Upgrade

if you are trying to upgrade from 5.1(5)E1 to 6.0(5)E3, then you've loaded the wrong file.

The IPS-K9-r-1.1-a-6-0-5-E3.pkg is a Recovery file (the -r- in the name is the designator for a recovery file).

The recovery file is for changing what is in the sensor's recovery partition.

The recovery partition is only used when you've seen problems on a runnning system and need to get back to a good running version.

It is not for upgrading from an older version to a newer version.

You will want to download the 6.0(5)E3 upgrade file instead:

Go to the main IPS download page:

Select IPS Appliances, select IPS 4200 Series Sensors, and select the IDS-4215.

Then select the "Intrusion Prevention System (IPS) System Upgrades". the "System Upgrades" is where the upgrade files are located.

Then in the Latest Releases folder select the 6.0(5)E3 version.

You will want to download and install the IPS-K9-6.0-5-E3.pkg file.

New Member

Re: IDS-4215 Upgrade

Excellent - worked and now IDS is up on Version 6.0. tnks! New GUI -very nice..

I also loaded the latest sig file. tnks!