cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
606
Views
0
Helpful
3
Replies

IDS-4235-K9 upgrade from Version 4.1(5)S248 to IPS Sensor Software Version

sercopi
Level 1
Level 1

Good morning my IDS System is composed by:

-IDS-4235-K9

-Cisco IDS Event Viewer 4.1-1 which dispose of signature S248

I would know if there is an upgrade guide to make the upgrade activity, and I would know if I have to upgrade to ver. 5.1 also the Cisco IDS Event Viewer, or the upgrade is only about to the Sensor appliance.

Any information that you can send me are welcomed.

Best Regards

--

Davide

3 Replies 3

rhermes
Level 7
Level 7

Davide -

To get from 4.1(4)S248 to 5.1(3)S248, get these files from CCO and run these commands:

upgrade ftp://user@ftpserverIP/IPS-K9-maj-5.0-1c-S149.rpm.pkg

Wait until the Analysis Engine is running before proceeding to the next upgrade (use iplog-stat to see if it's busy)

upgrade ftp://user@ftpserverIP/IPS-K9-min-5.1-1g.pkg

Wait until the Analysis Engine is running before proceeding to the next upgrade

upgrade ftp://user@ftpserverIP/IPS-K9-sp-5.1-3.pkg

This will upgrade both the sensor software and the IDS Event Viewer.

Hi rhermes thank you very much for your answer If I can, I would ask you another question: when in the process of upgrade I must use the license key IDS20060913065850475.lic?

Any information that you can send me are welcomed

Best Regards

Davide

Hi rhermes sorry for my the second message, I want to thank you becauese with your jewellery help, now this is the #sh ver of my Cisco Sensor:

4235zcom# sh ver

Application Partition:

Cisco Intrusion Prevention System, Version 5.1(3)S248.0

-->snip<--

-->snip<--

MainApp 2006_Jun_28_03.30 (Release) 2006-06-28T04:17:58-0500 Running

AnalysisEngine 2006_Jun_28_03.30 (Release) 2006-06-28T04:17:58-0500 Running

CLI 2006_Jun_28_03.30 (Release) 2006-06-28T04:17:58-0500

Upgrade History:

* IPS-K9-min-5.1-1 13:46:00 UTC Tue Nov 15 2005

IPS-K9-sp-5.1-3.pkg 10:40:18 UTC Thu Sep 14 2006

Recovery Partition Version 1.1 - 5.1(1)

I would ask you the last question:

for the future, when I have to perform signature update for my Cisco IDS Event Viewer

4.1-1

I must download from:

IPS MC: http://www.cisco.com/cgi-bin/tablebuild.pl/ipsmc-ips5-sigup

are good this upgrade file, for my platform release of Cisco IDS Event Viewer?

Thanks again for your help.

Any information that you can send me are welcomed!

Kind regards

Davide

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: