IDS MODULE IN 3800

[netsec123]

Hi. We are trying to BLOCK port scans coming from INSIDE our LAN. We are confused on how to configure this on the 3800 that houses the IDS module. PLEASE HELP.

[edwakim]

Hi,

First NM-CIDS module needs to know the port scan. You can configure the NM-CIDS module setting in your router. Please follow the guide below.

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df95.html#wp1032121

Then you can configuring blocking. Your NM-CIDS's ethernet interface will either telne t or ssh to your router to put blocking.

You can find more about blocking here.

CLI 5.1

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df77.html

IDM 5.1

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00804d1374.html

Thank you.

Edward