Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Silver

IDSM issue

i am having 6513 which consists of IDSM module.I had given the ip to sensor is 10.0.4.91/24,10.0.4.1 and my pc address is 10.0.4.98.I am able to ping form the sensor to my pc(10.0.4.98) but not able to ping from the pc.Please resolve it becasue i want to ue the IDM .

Both are the part of vlan 15

----------------------------------------

configuration of 6513:-

intrusion-detection module 4 management-port access-vlan 15

configuration of sensor:

service host

network-settings

host-ip 10.0.4.92/24,10.0.4.1

host-name IDSM-2

access-list 10.0.0.0/24

exit

exit

3 REPLIES
Community Member

Re: IDSM issue

Hi Shivlu,

Ping to the IDSM is shut off.

Cisco now joins the rest of the world and turns off the default ping.

Cisco Employee

Re: IDSM issue

Your access list is incorrect for what you are attempting.

With 10.0.0.0/24 you are only allowing 10.0.0.0-10.0.0.255

You need to change it to 10.0.4.0/24 to allow 10.0.4.0-10.0.4.255

Silver

Re: IDSM issue

thanks dear i had done that.now can you tell me how to monitor the IDSM.i am accessing it thru IDM.But not able to see anything .even i had studied its IDM v 5.1 guide but all in vein.can you help me.

shivlu

129
Views
0
Helpful
3
Replies
CreatePlease to create content