I have one IDSM2 version 5.1(6)E1 running promiscuous mode monitoring 2 vlans. The IDSM2 is monitored by a MARS50 with "Pull IP log" activated and the IDSM2 has the options "overrides log-pair-packets" and "overrides produce-verbose-alert" activated as described in the MARS manual.
My guess is that these settings caused the MARS to overload the web server on the IDSM because now the MARS can't fetch any new events from the IDSM2 and I can't access the web interface.
Any ideas how to fix this? I can't find any option to "reboot" the web service on the sernsor. I guess rebooting the sensor itself is one option but I'd rahter not do that.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...