Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

IDSM2 System Image Upgrade

Dear all,

Current running System Image is 6.0(1)E1, whether I can upgrade direct to 6.1(1)E2 or I have to go step by step like 6.0(2)E1 and then next. In addition I want to know if I upgrade, the current configuration will lose or not. kindly

update.

thanks & regards,

5 REPLIES

Re: IDSM2 System Image Upgrade

From Cisco:

"The minimum required version for upgrading to 6.1(1) is 5.0(1) or later, which is available as a download from Cisco.com.".

You won't loose any configs but just keep a backup handy and check the release notes for any particular caveats related to your specific platform:

http://www.cisco.com/en/US/docs/security/ips/6.1/release/notes/17173_01.html#wp1114017

Regards

Farrukh

Community Member

Re: IDSM2 System Image Upgrade

many thanks.....

Dear after I upgrade from 6.0(1)E1 to 6.0(2)E1 the sensor restart and gone to status other, after a while the status showing powerdown. will you please show me how to rectify.

thanks & regards

Re: IDSM2 System Image Upgrade

Try one of the following:

hw-module module 5 boot 0

hw-module module 5 boot 1

hw-module module 5 boot 2

Whichever works :)

Regards

Farrukh

Community Member

Re: IDSM2 System Image Upgrade

Hai dear, thanks for your comments.....

unfortunately i have to complete this task very urgent. so I reimage system files 6.1(1)E1. its working fine.

thanks & Regards,

Re: IDSM2 System Image Upgrade

Glad you managed to fix it :)

Regards

Farrukh

149
Views
0
Helpful
5
Replies
CreatePlease to create content