when i enabled inline mode in AIP-SSM 10 sofware version 7.0 (1) E3 , VPN users are connected but when they try to open any application ex: outlook etc , it dos'nt open , i would like to know which signature is blocking this traffic .
From the symtoms that you explain, normally it is the TCP normalizer engine signature that is causing the issue. Some of them are not actually configured to produce alert, so you might want to check via the "show stats virtual-sensor vs0"
The TCP normalizer engine is in the 1300 signature range.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...