Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IPS 4240 boot problem

Hi ,all

ips 4240 , boot  screen  display  this information again and again , it’s not work when i try to copy a new image to flash card from tftp , test the flash card is ok ,so what should i do to fix it

CISCO SYSTEMS

Embedded BIOS Version 1.0(11)2 01/25/06 13:21:26.17


Low Memory: 631 KB

High Memory: 2048 MB

PCI Device Table.

Bus Dev Func VendID DevID Class              Irq

00  00  00   8086   2578  Host Bridge       

00  01  00   8086   2579  PCI-to-PCI Bridge 

00  03  00   8086   257B  PCI-to-PCI Bridge 

00  1C  00   8086   25AE  PCI-to-PCI Bridge 

00  1D  00   8086   25A9  Serial Bus         11

00  1D  01   8086   25AA  Serial Bus         10

00  1D  04   8086   25AB  System            

00  1D  05   8086   25AC  IRQ Controller    

00  1D  07   8086   25AD  Serial Bus         9

00  1E  00   8086   244E  PCI-to-PCI Bridge 

00  1F  00   8086   25A1  ISA Bridge        

00  1F  02   8086   25A3  IDE Controller     11

00  1F  03   8086   25A4  Serial Bus         5

00  1F  05   8086   25A6  Audio              5

02  01  00   8086   1075  Ethernet           11

03  01  00   177D   0003  Encrypt/Decrypt    9

03  02  00   8086   1079  Ethernet           9

03  02  01   8086   1079  Ethernet           9

03  03  00   8086   1079  Ethernet           9

03  03  01   8086   1079  Ethernet           9

04  02  00   8086   1209  Ethernet           11

04  03  00   8086   1209  Ethernet           5


Evaluating BIOS Options ...

Launch BIOS Extension to setup ROMMON


Cisco Systems ROMMON Version (1.0(11)2) #0: Thu Jan 26 10:43:08 PST 2006


Platform IPS-4240-K9


Use BREAK or ESC to interrupt boot.

Use SPACE to begin boot immediately.

                                               

Launching BootLoader...

Default configuration file contains 1 entry.


Searching / for images to boot.


No images in /

Error 15: File not found


unable to boot an image



Default configuration file contains 1 entry.


Searching / for images to boot.


No images in /

Error 15: File not found


unable to boot an image



Failsafe booting engaged.

Default configuration file contains 1 entry.


Searching / for images to boot.


No images in /

Error 15: File not found


unable to boot an image




Booting system, please wait...


  • Intrusion Prevention Systems/IDS
Everyone's tags (2)
1 REPLY
Cisco Employee

IPS 4240 boot problem

The issue could be due to the flash not getting detected during boot up. Please contact Cisco TAC to report the issue.

As a workaround you might want to try this.

1. Hard reboot ( power cycle)  the device

2.  Enter the Rommon mode by interrupting boot sequence.

3. Reimage the device.

Let me know if this works.

963
Views
0
Helpful
1
Replies