cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
357
Views
0
Helpful
1
Replies

IPS 4240 problem

alex goshtaei
Level 1
Level 1

Hi All,

we've installed IPS 4240 since 6 months ago and everything worked fine. Then I noticed time in IPS was not correct, then in the IDM, I've changed summer time to 60 minutes offset to get the right time from NTP. then reboot the IPS, since that time users inside the network are not able to connect to internet, and basically traffic from inside to outside is blocked. But traffic from outside to inside is fine and outside users are able to hit to the web server in DMZ zone.

any idea would be very appreciated.

thanks

Alex

1 Reply 1

rhermes
Level 7
Level 7

Changing your time offset should not cause this type of problem. Check for any non-running processes with a "sh ver", reboot your sensor and check the system log for some signs of trouble or blocking with "sh events past 01:00".

Open a TAC case to get additional help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: