There are 2 numbers of edge 3560 in-line power switches connected to the core 4507R with DOT1Q trunk. The edge switch ports all configured with both data and voice vlans (VLAN 2 for Data and VLAN 9 for Voice)
The trunk link carries these 2 vlans plus the mgmt vlan 8.
In this setup i need to implement the IPS in IDS mode.
Please explain me the steps to complete the installation.
I plained to create the RSPAN and connected the IDS in the 2nd switch.
Please narayan i need to know more about the setup procedures.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...