IPS is sensing the internet traffic towards my network.
Now i m getting so mnay alarms HIGH, LOW and medium. I want to get minimum alarm about different signature.
Kindly tell me how to configure alarm summary so that during specific time I will get only few alarms when one single signature trigger.
Also I am having problem in blocking. I have configured the action on specific signature to block the source IP address, but still i m getting alarm of that signature and still the IP is triggering the alarm. I also not able to see Block network or hosts in IPS monitoring window.
Kindly guide how to configure IPs for following things.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...