the IPS module in our new ASA-5515-X keeps reloading roughly every 60 minutes, all by itself. This keeps happening even after multiple reboots of the IPS module. These mysterious reloads only take about 1 second, but during this one second, all connections are dropped - even if "If IPS Card Fails" is set to "Permit Traffic". So I had to disable the IPS completely for the moment.
Any ideas on how to fix this will be greatly appreciated. Screenshot from the log viewer attached below.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...