Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

IPS time synchronization

how i synchronize time on IPS 4260.

1 REPLY
Cisco Employee

Re: IPS time synchronization

I assume you are trying to synchronize time with an ntp-server. This is how you can configure on sensor CLI :

sensor# configure terminal

sensor(config)# service host

sensor(config-hos)# ntp-option enable

sensor(config-hos-ena)# ntp-servers ip_address key-id key_ID

Later versions of the sensor software also support the unauthenticated option for time synchronization as

qsensor-204(config)# ser host

qsensor-204(config-hos)# ntp-option enabled-ntp-unauthenticated

qsensor-204(config-hos-ena)# ntp-server x.x.x.x

174
Views
0
Helpful
1
Replies
CreatePlease to create content