Hi, Just need an expect opinion on my old IDSM-1. I have included the show ver. Notice the test that failed. Is the module faulty ?
Regards.
-----
show ver
Current Time: Sat Jul 22 09:05:01 2006
Sensor version is : 3.0(7)S106
ONYX accelerator version information:
Sat Jul 22 09:02:34 2006
========================================================================
Prom Format: 0
Make: Model: Asic: Class/ACT-Sys: 0MHz Proc: 0Mhz Proc_bus: 0Mhz
Mem: 0MB
MAC_A: NONE Eadr: 00000
MAC_B: NONE Eadr: 00000
Part No: 73-4888-03 CM: 0 OEM: Serial No: 06380256 Tested on:
Test: FAIL S/W Rev: 0 Count: 0
========================================================================
DIAG: dump_cfg_prom PASSED
BIOS version information:
BIOS Information (Type 0) [handle 0]
---------------------------------------
--MORE--
Vendor: Intel Corp.
BIOS Version: 4B4LZ0XA.33A.8000.D.0003021430
BIOS Start Addr Seg: 0xf000
BIOS Release Date: 03/02/2000
BIOS ROM Size: 256K
BIOS Characteristics: 90 de fb 7f 00 00 00 00
System Information (Type 1) [handle 1]
-----------------------------------------
Manufacturer:
Product Name:
Version:
Serial Number:
UUID: e636f2b9f0d411d3ac9f0800099595ca
Wake-up Type: 0x05
Base Board Information (Type 2) [handle 2]
---------------------------------------------
Manufacturer: Intel Corporation
Product: BL440ZX
Version: AA725757-105
Serial Number: IUBL01001260
--MORE--
System Enclosure or Chassis (Type 3) [handle 3]
--------------------------------------------------
Manufacturer:
Type: unknown (0x02)
Version:
Serial Number:
Asset Tag:
Bootup State: (0x02)
Power Supply State: (0x02)
Thermal State: (0x02)
Security State: Unknown(0x02)
