Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Is my IDSM-1 dead ?

Hi, Just need an expect opinion on my old IDSM-1. I have included the show ver. Notice the test that failed. Is the module faulty ?



show ver

Current Time: Sat Jul 22 09:05:01 2006

Sensor version is : 3.0(7)S106

ONYX accelerator version information:

Sat Jul 22 09:02:34 2006


Prom Format: 0

Make: Model: Asic: Class/ACT-Sys: 0MHz Proc: 0Mhz Proc_bus: 0Mhz

Mem: 0MB

MAC_A: NONE Eadr: 00000

MAC_B: NONE Eadr: 00000

Part No: 73-4888-03 CM: 0 OEM: Serial No: 06380256 Tested on:

Test: FAIL S/W Rev: 0 Count: 0


DIAG: dump_cfg_prom PASSED

BIOS version information:

BIOS Information (Type 0) [handle 0]



Vendor: Intel Corp.

BIOS Version: 4B4LZ0XA.33A.8000.D.0003021430

BIOS Start Addr Seg: 0xf000

BIOS Release Date: 03/02/2000

BIOS ROM Size: 256K

BIOS Characteristics: 90 de fb 7f 00 00 00 00

System Information (Type 1) [handle 1]



Product Name:


Serial Number:

UUID: e636f2b9f0d411d3ac9f0800099595ca

Wake-up Type: 0x05

Base Board Information (Type 2) [handle 2]


Manufacturer: Intel Corporation

Product: BL440ZX

Version: AA725757-105

Serial Number: IUBL01001260


System Enclosure or Chassis (Type 3) [handle 3]



Type: unknown (0x02)


Serial Number:

Asset Tag:

Bootup State: (0x02)

Power Supply State: (0x02)

Thermal State: (0x02)

Security State: Unknown(0x02)

Cisco Employee

Re: Is my IDSM-1 dead ?

It looks like your Onyx accelerator has died. I'd suggest reseating it, but thats about all you can really do.

Looks like the rest of the system is running ok though.

New Member

Re: Is my IDSM-1 dead ?

Hi. I have tried to reseat the module. Doesn't help. Anyway what is the function of Onyx accelerator ?

CreatePlease login to create content