Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Latest signature update

Dear All,

We would like to update our sensor with the latest signature set. Please find below the current running sensor details.

AIP-SSM# sh configuration

! ------------------------------

! Current configuration last modified Wed Nov 23 16:03:43 2011 ! ------------------------------ ! Version 6.0(6) ! Host:

!     Realm Keys          key1.0

! Signature Definition:

!     Signature Update    S399.0   2009-05-06

!     Virus Update        V1.4     2007-03-02

! ------------------------------

Based on the above information kindly suggest the signature set and other pre -requisites

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

Latest signature update

Hello Shibu,

Here is the one you are looking for:

IPS-sig-S479-req-E3.pkg
Release Date: 24/MAR/2010
E3 Signature Update S479
Size: 419.93 KB (430007 bytes)

Please rate helpful posts,

Regards.

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
5 REPLIES
New Member

Latest signature update

Give the show version output for better analysis.

New Member

Latest signature update

AIP-SSM# sh ver
Application Partition:

Cisco Intrusion Prevention System, Version 6.0(6)E3

Host:
    Realm Keys          key1.0
Signature Definition:
    Signature Update    S399.0                   2009-05-06
    Virus Update        V1.4                     2007-03-02
OS Version:             2.4.30-IDS-smp-bigphys
Platform:               ASA-SSM-20
Serial Number:          JAF1347ARMC
Licensed, expires:      23-Nov-2012 UTC
Sensor up-time is 6 days.
Using 1019588608 out of 2093604864 bytes of available memory (48% usage)
application-data is using 41.6M out of 166.8M bytes of available disk space (26%                                                                                                  usage)
boot is using 37.6M out of 68.6M bytes of available disk space (58% usage)


MainApp          N-NUBRA_2009_JUL_15_01_10_6_0_5_57   (Ipsbuild)   2009-07-15T01                                                                                                 :15:08-0500   Running
AnalysisEngine   N-NUBRA_2009_JUL_15_01_10_6_0_5_57   (Ipsbuild)   2009-07-15T01                                                                                                 :15:08-0500   Running
CLI              N-NUBRA_2009_JUL_15_01_10_6_0_5_57   (Ipsbuild)   2009-07-15T01                                                                                                 :15:08-0500

Upgrade History:

  IPS-K9-6.0-6-E3   13:48:06 UTC Wed Jul 15 2009

Recovery Partition Version 1.1 - 6.0(6)E3

AIP-SSM#

Please find above the details

Thanks

Shibu

Latest signature update

Hello Shibu,

Here is the one you are looking for:

IPS-sig-S479-req-E3.pkg
Release Date: 24/MAR/2010
E3 Signature Update S479
Size: 419.93 KB (430007 bytes)

Please rate helpful posts,

Regards.

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
New Member

Latest signature update

Hi Julio,

Could you please send me the procedures to update the signatures to sensor. also E3 to E4 engine upgrade porcedures as well.

New Member

Latest signature update

You may read this detailed guide for IPS upgrade:

http://www.cisco.com/en/US/docs/security/ips/5.0/configuration/guide/cli/cliimage.html#wp1064238

Upgrade procedure is the same as for engine and signatures but signature update may take more time and engine upgrade may require sensor reboot.

519
Views
0
Helpful
5
Replies
CreatePlease login to create content