Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Monitor disk usage using snmp on the IPS 5.1 sensor

Hi

I was wondering if it is possile to monitor the diskspace on the partitions of the sensor by using the built in snmpd on the IPS 5.1 sensor appliance. When i try to snmpwalk the sensor i cant see the usual net-snmp stuff.

The "cisco.ciscoMgmt.ciscoCidsMIB" entries are showing up nicely but they dont give any output concerning the disk in the sensor.

3 REPLIES
Silver

Re: Monitor disk usage using snmp on the IPS 5.1 sensor

I believe there must be a CLI way to find out the disk space information on the sensor. Anyone know this command?

Gold

Re: Monitor disk usage using snmp on the IPS 5.1 sensor

I assume you're talking about scripting this? Probably the easiest thing to do would be to use Curl. I've attached an example. You'll need to change a couple values for it to work.

The output is different than what you'd get if you did a "df" using the service account. You'll have to decide which output you require.

Gold

Re: Monitor disk usage using snmp on the IPS 5.1 sensor

Here is the attachment.

152
Views
0
Helpful
3
Replies
CreatePlease login to create content