Can someone assist me on setting up the IPS ASA-SSM-10 module in ASA 5520 firewall . I have just licensed the box. It would be great if someone can help me with relevant videos\docs to configure the SSM module to enable all the required IPS features for the box to run. I am running ASDM 6.4 and if anyone has the configs to enable via ASDM\CLI whichever is feasible is fine . Kindly assist .Below is the module details.
ASA 5500 Series Security Services Module-10 Model: ASA-SSM-10 Hardware version: 1.0 Firmware version: 1.0(11)5 Software version: 7.1(8)E4 App. name: IPS App. Status: Up App. Status Desc: Normal Operation App. version: 7.1(8)E4 Data plane Status: Up Status: Up
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...