There are two routers, each with a NME-IPS module. For high availability, the routers are running HSRP and the NME-IPS is inline. If the router fails, then we know that the standby router would take over and so will the NME-IPS module inside the standby router start being inline.
However, lets take another case where the primary router is ok but the NME-IPS inside the router has failed? Is it possible for the IPS function to shift to the standby router's NME-IPS? Or is it possible to force the standby router and its IPS to become active due to the IPS failing?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...