Is there any way to read the serial number of NM-CIDS modules, IDS-4235 & IDS-4215 appliances remotely? I need to do an inventory of geographically dispersed IDS's without physically visiting each router or appliance.
If you are running version 5.0, then the serial number will show in the "show version" output.
This was a change added in the version 5.0 software.
If you are running version 4.1, then for the IDS-4235, and IDS-4215 you would have to physically look at the stickers on the chassis. Version 4.1 did not have any commands for showing the serial number.
However, for the NM-CIDS you should be able to login to the router (instead of the NM-CIDS) and execute "show inventory" on the router to see the serial number of the module.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...