Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Recovery password of AIP-SSM on ASA5510

Hi all,

I've configured AIP-SSM on ASA5510, the first time log in to sensor, it prompts to change the default password. But the second time, I can't log in with the password which I've changed.

How can I recovery password? Does anyone meet the same problem?

Thanks,

Phuong

3 REPLIES
Silver

Re: Recovery password of AIP-SSM on ASA5510

Are you sure you actually changed the password? Try the default again.. cisco/cisco. Then it will ask you for the UNIX password (cisco). Then it will ask you for your new password (then it asks to confirm the new password). Let me know...

Please rate if this helps.

New Member

Re: Recovery password of AIP-SSM on ASA5510

I'm sure that password have been changed. I also tried the default password but can't log in. I can't find the link on cisco.com to crack password, can U help me?

Many thanks,

Phuong

Cisco Employee

Re: Recovery password of AIP-SSM on ASA5510

From the ASA CLI you will need to re-image/recover the System Image of the SSM:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids12/cliguide/cliimage.htm#wp1032373

Putting on the new System Image will reformat the compact flash which winds up erasing your current configuration and also the current passwords.

268
Views
7
Helpful
3
Replies