Please let me know if i want to configure IPS in such a way so that the certain packets coming to firewall , routers (in the same or different network)gets blocked according to "Blocking devices " facility by specifying a certain ACL and that action shud be taken only if a particular signature triggers on those firewall / routers
Also , since this wil require IPS to access these devices (via certain key) therefore do i need to give any ACL in those firewall , routers so as to allow IPS to enforce those acls to get implemented on those firewall , routers
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...