Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

[Restore IPS 5.1(1) -> 4.1]

I want to restore ips 5.1(1) -> 4.1.

But, Restore was failed.

Error Message is below.

--------------------------------

Error: execUpgradeSoftware : idsPackageMgr: digital signature of the update file was not valid, use CCO to replace corrupted fileTarget system does not have a valid license to process the config with the version S203.1

-------------------------------------

Because IPS 4250 is test machine, I

don't have valid License.

So. I Update Temporary License.

(Expiration date : 06.1.31)

If IPS 4250 have valid smartnet License,

restore(5.1->4.0) is possible?

Thanks....help

1 REPLY
Bronze

Re: [Restore IPS 5.1(1) -> 4.1]

Upgrading the Recovery Partition

Use the upgrade command to upgrade the recovery partition with the most recent version so that it is ready if you need to recover the application partition on your sensor.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguide//cliimage.htm#wp1073251

297
Views
0
Helpful
1
Replies
CreatePlease to create content