Is there anyway to do RSPAN from one site to HQS over layer three connection. I got IDS at HQS and i want to capture traffic from site ? cisco documents talk about RSAPN over layer 2 network but in my case it is going to be layer 3 because it has to come to HQS from site. any idea on how to acheive this. THanks
RSPAN is used if the source of the interesting traffic is on one switch and the analyzer (the capturing device, say IDS) is on the other switch. Both switches must be connected over a trunk that passes the RSPAN VLAN traffic. I am not sure if this traffic can be transported over layer 3, but I believe some tunneling techiques may be used. Anyone tried this?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...