Snort to Cisco Conversion Utility (Alpha) -- Testing Needed
I'm currently working on a Snort to Cisco Conversion Utility. The goal of the project is to be able to take custom Snort rules and convert them into Cisco syntax (presently CLI for import purposes). I need some help testing the tool and figuring out where to take it from here. I especially need assistance in verifying the conversion process from Snort->Cisco. There's some working code available, but am not handling 100% of the conversion cases at this point. If you think you can assist, please take a look at:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...