Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

SPAN config clarification

Hi friends,

Just wanted to clarify if this SPAN configuration is possible for sending traffic to IDS.

Server Farm 6500 switch1

-------------------------

monitor session 1 source vlan 1 - 3000

monitor session 1 destination interface Gi8/6 (port which is connected to IDS Swich)

Server Farm 6500 switch2

--------------------------

monitor session 1 source vlan 1 - 3000

monitor session 1 destination interface Gi8/6 (port which is connected to IDS Swich)

IDS Switch

------------

monitor session 1 source interface Gi0/1 - 2 (ports which connects to Gig 8/6 in 6500 Server farm swiches)

monitor session 1 destination interface Gi0/49 (port wich connects to IDS)

Note: Please bear with me for a double posting in both Lan switching and routing and Security-->IPS forums for this issue.

Thanks a lot

Gautam

1 REPLY
Community Member

Re: SPAN config clarification

Just wanted to add that the SPAN destination ports are access ports and not trunk ports.

Thanks a lot

Gautam

137
Views
0
Helpful
1
Replies
CreatePlease to create content