Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ssm-10 real time monitoring

Is there a way to get real-time notifications on security events on a ssm module I have installed in my ASA? Are SNMP traps the only option? Also under the ASDM home/Intrustion Prevention page, the sensor health section has event retrieval marked as critical "not retrieved". How do I clear this? I've view the events on the module, and this does not clear it. Does this have to do with the MARS product??

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: ssm-10 real time monitoring

You can use IME to monitor the IPS in real-time. It also supports real-time event management for five IPS devices. Have a look at it:

http://www.cisco.com/en/US/products/ps9610/index.html

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html

It is freely available for all customers have a valid service contract. Make sure you are running 6.1.x code to utilize the performance management features of IME.

Regards

Farrukh

Re: ssm-10 real time monitoring

No problem at all, glad you have it working :)

6 REPLIES

Re: ssm-10 real time monitoring

You can use IME to monitor the IPS in real-time. It also supports real-time event management for five IPS devices. Have a look at it:

http://www.cisco.com/en/US/products/ps9610/index.html

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html

It is freely available for all customers have a valid service contract. Make sure you are running 6.1.x code to utilize the performance management features of IME.

Regards

Farrukh

New Member

Re: ssm-10 real time monitoring

Thanks, I'll take a look at it!

New Member

Re: ssm-10 real time monitoring

I am looking at this also. I follow the link that says 'download' but then it says that it cannot find the specified file. Anyone else having this issue?

Re: ssm-10 real time monitoring

Use this link:

http://www.cisco.com/cgi-bin/tablebuild.pl/ips-ime

I guess you would need a valid service contract to download.

Please rate if helpful.

Regards

Farrukh

New Member

Re: ssm-10 real time monitoring

I installed this software last week, and it is working great! This was just what I was looking for.

Thanks again for your help.

Re: ssm-10 real time monitoring

No problem at all, glad you have it working :)

203
Views
0
Helpful
6
Replies
CreatePlease login to create content