Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SSM-10 Signature Autoupdate fails

Hey guys,

I've seen the thread quite a bit here bit am still struggling. For some reason the SSM module is connected behind another firewall before eventually passing the traffic off to the ASA in-which the IPS module is housed.

I'm not seeing any drops on the 'first' firewall infront of the SSM but I see a reference in the User Guide to requiring a access policy with 2 cisco ip's in.

198.133.219.25 (443)

AND

198.133.219.243 (80)

Currently the policy only has 198.133.219.25 in it.

Are both these ips required for IPS signature updates to succeed?

Also, just to confirm that the default URL is: https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl as at 6.1-2(E3)

Many Thanks,

Paul

134
Views
0
Helpful
0
Replies
CreatePlease to create content