Traffic Stops after 10-15 minutes after IPS put inline
I put our 4250 inline with our PIX using the interfaces setup as pairs. The IPS was set to take no action on all sigs. After about 10-15 minutes traffic to the PIX stopped from inside and I had to move back to the oringal port. The PIX is on it's on vlan. The IPS port on the switch side was set to the same vlan as the PIX. Port speed and duplex was hard coded on all interfaces. No errors on any of the ports. The setup was like this
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...