Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unable to access AIP-SSM module by Cisco ASA 5520 console

Hi,

I installed a AIP SMM module in an Cisco ASA 5520 device.

After poweron the status and power leds on the module are ok.

When I am trying to access the module for basic configuring (by the ASA console), I get this message:

ASA5520# session 1

Opening command session with slot 1.

Card in slot 1 did not respond to session request.

Does somebody have experience with this issue?

Do I need an extra license to activate the AIP SMM module?

Thanks in advance,

Regards,

Nico

2 REPLIES

Re: Unable to access AIP-SSM module by Cisco ASA 5520 console

Hello Nico, did you try resetting the module?

hw-module module 1 reset

Have a look at this link for more information:

http://www.cisco.com/en/US/docs/security/ips/5.0/configuration/guide/cli/clissm.html#wp1034193

HTH

Regards

Farrukh

New Member

Re: Unable to access AIP-SSM module by Cisco ASA 5520 console

Module was defective and is replaced now.

Thanks for your help.

Nico

693
Views
0
Helpful
2
Replies