Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Upgrade to IPS Module

I am trying to push an update via tftp to my IPS module, but am unsure of how to cable this.

ASA Internal Int: 10.1.3.1

ASA IPS Mod: 10.1.9.201

ASA IPS GW: 10.1.9.1

Do I need to cable my TFTP server directly to the IPS module, or does it go into the internal interface? I have tried both and my TFTP server is not showing any traffic.

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: Upgrade to IPS Module

The AIP-SSM module has it's own Management interface (it's the only ethernet jack on the face of the module). This needs to be connected to your TFTP server. Either directly (via a roll-over cable) or through a switch or router.

1 REPLY
Gold

Re: Upgrade to IPS Module

The AIP-SSM module has it's own Management interface (it's the only ethernet jack on the face of the module). This needs to be connected to your TFTP server. Either directly (via a roll-over cable) or through a switch or router.

153
Views
0
Helpful
1
Replies
CreatePlease to create content