My suggestion to you would be this: Use the IDM provided with the system. It is a lot easier for people unfamiliar with the IPS in CLI mode.
You can access this device via a webpage, "https://"IPADDRESS" and modify it like this. I do have to point out that the IPS limits this connectivity out of the box. You'll want to modify this access-list to include the IP address you're connecting from. Also, you'll want to ensure the HTTPS Service is enabled, and on port 443 for ease of use. All of this will need to happen initially in the CLI.
Once you're in the IDM you'll want to select
"Configuration". From here scroll down to the update section. You'll select "update is located on this client" and you're golden. You can simply upload your latest signature from the XP machine.
I can connect the LAN switch directly to the inside interface of the ASA5510 firewall. Hosts can get Internet connectivity while cabled to the switch. However, when the LAN switch is connected to the port on the IPS module, there is no Internet connectivity. Any suggestions would be appreciated. The following is the sh configuration and sh int output.
! Current configuration last modified Sat Apr 05 12:28:11 2008
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...