Using CSA to restrict access to SPECIFIC USB Drives
I am working on a client installation of CSA 6.0.1 and one of the client requirements is to restrict access to specific USB drives. I can identify the specific Device identifiers within Windows and have been unable o establish a parameter in the detection and permitting specific ones to be written; it seems it is either deny or permit all. Any assistance would be greatly appreciated.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...