03-04-2014 09:01 AM - edited 03-16-2019 10:00 PM
Hello
I have a 2900 router with FXO ports running Cisco IOS Software
c2900-universalk9-mz.SPA.151-4.M5.bin .
The problem is when the call is ended and we hung-up, port remains in off-hook and the line remains busy for long time.
03-04-2014 09:38 AM
Can you post your GW configuration and what version of CUCM\CUCME you're using?
HTH
Regards,
Yosh
03-04-2014 10:02 AM
CUCM 8.6.2.23900-10
Do you need all configuration or voice port?
voice-port 0/0/0
trunk-group PSTN
cptone IL
timeouts call-disconnect 1
timeouts wait-release 1
connection plar 58694150
impedance complex2
caller-id enable
!
voice-port 0/0/1
trunk-group PSTN
cptone IL
timeouts call-disconnect 1
timeouts wait-release 1
connection plar 58694151
impedance complex2
caller-id enable
!
voice-port 0/0/2
trunk-group PSTN
cptone IL
timeouts call-disconnect 1
timeouts wait-release 1
connection plar 58694152
impedance complex2
caller-id enable
03-04-2014 10:13 AM
Eran,
Depending on where you're, there can be many options for detecting a call disconnect. Check out the links below, they should help you.
Cisco FXO options:
Tone database:
http://www.3amsystems.com/wireline/tone-search.htm
HTH
Regards,
Yosh
03-05-2014 06:15 AM
when calls going out through the fxo ports everything is ok after the calls disconnect
the fxo go to on hook mode .
when calls coming in through the fxo port after the call disconnect the port is still in off hook mode for 7 minutes .
03-09-2014 08:08 AM
up
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide