Desired call flow:
H323 GW -> PSTN emulator via E1->inbound dial peer-> outbound dial peer -> different H323 GW via another E1
When dialing from H323 # 1 to H323 # 2, destination phone rings. As soon as call is answered, phone #1 starts playng busy signal.
debug voice dialpeer at all 3 locations shows correct dialpeer matching and correct call flow.
In my PSTN emulator, I have added voice service voip I have added H323 to H323.
All E1s show multiframe established.
In the reverse direction, the phone at GW 2 rings the phone at GW 1, the destination phone rings once and then the call drops
I can post any portions of the config if desired
Jeff