MCU gatekeeper

[ricardorojas123]

A video conference created manually in the MCU Interface 3515MCU, should be reflected as a endpoint in the Gatekeeper (with the command show gatekeeper endpoint specifically with the e.164ID) ?

The MCU is registered in the Gatekeeper

[gogasca]

yes, whats the output for show gatekeeper endpoints?

If it is registered yes...

[jmecklenburg]

The register a MCU in Gatekeeper is:

GK_STGO01#show gatekeeper endpoints

GATEKEEPER ENDPOINT REGISTRATION

================================

CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags

--------------- ----- --------------- ----- --------- ---- -----

172.16.2.2 59971 172.16.2.2 32839 CUCM_STGO VOIP-GW

H323-ID: Trunk_GK_STGO01_1

Voice Capacity Max.= Avail.= Current.= 2

172.17.1.2 1720 172.17.1.2 1719 CUCM_STGO MCU

H323-ID: MCU_STGO01-172017001002

E164-ID: 72

E164-ID: 85

E164-ID: 84

E164-ID: 80

E164-ID: 81

Regards

[ricardorojas123]

For example, if I create a new conference through of the Web administration of the MCU. With a Prefix and Unique Number of 81(ServicePrefix) and 555(UniqueNumber), the new number formed 81555, should be displayed as a result of the command show gatekeeper endpoints?