02-20-2007 06:46 AM - edited 03-14-2019 08:07 PM
Hi all,
its configured unity express and cme 0n the same 2851 router
CME [Version=4.0(3)]
========================
Version 4.0(3)
Mode is srst
Max-pool is 96
Max-dn is 288
Cisco unity Express(CUE) Ver info
Installed Packages:
- Installer 2.1.3
- Bootloader (Primary) 2.1.2
- Infrastructure 2.1.3
- Global 2.1.3
- GPL Infrastructure 2.1.3
- Voice Mail 2.1.3
- Bootloader (Secondary) 2.1.2
- Core 2.1.3
- Auto Attendant 2.1.3
Installed Languages:
- English language pack 2.1.3
Confiured outside caller will routed to AA pilot number and after welcome,it willl ask dial the extension(default welcome method).The problem if the outside person dial number assigned to all 7960 ip phone ,it will work properly.But if the dialed number is assigned to 7911 it will not work"the caller will get message saying"you are dialed an invalid number"
Have any can put some lights
thanks
Tom
Solved! Go to Solution.
02-20-2007 07:59 AM
Does the 7911's number actually exist in the CUE config? I.e. if you do a 'show run | inc phonenumber' on CUE, does it match the 7911's extension that you're dialing?
Does dial-by-name work for that user?
02-20-2007 07:59 AM
Does the 7911's number actually exist in the CUE config? I.e. if you do a 'show run | inc phonenumber' on CUE, does it match the 7911's extension that you're dialing?
Does dial-by-name work for that user?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide